(
| TESTING DATA | ||
| PROPERTY | STANDARD | RESULT |
|
Strength |
||
|
Crack Bridging |
ABAA T0004 Standard Test Method for Determining Gap Bridging Ability of Air and Water Resistive Barrier Materials |
Wet Cup: 20.5 perms |
|
Fungi Resistance |
ASTM C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facing |
PASS No growth |
|
Tensile Strength |
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
1.26 MPa (183 psi) |
| Elongation at Break Pass > 200 psi | ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension | 230% (>PASS) |
| Low Temp Flexibility | ASTM D522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings | PASS No changes effects |
| Alkali Resistance | ASTM D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents | PASS No adverse effects |
| Freeze Thaw Resistance | ASTM E2485 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings | PASS No surface change |
|
Durometer Hardness, Shore A |
ASTM C661 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
21 |
|
Water Vapor Transmittance |
||
|
Water Vapor Transmission Desiccant Method Procedure A |
ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials |
13.6 Perm (grains/hr•ft²•inchHg) |
| Water Vapor Transmission Water Method Procedure B | ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials | 20.5 Perm (grain/h•ft²•inchHg) 1173 ng/Pa•s•m² at 0.30 mm (20 mil) @23°C 50% RH |
|
Adhesion Testing |
||
|
Peel Adhesion (AAMA 711) |
ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
PASS >876 N/m (>5 pli) |
| Accelerated UV aging (AAMA 711) ASTM G154 Peal Adhesion |
ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants | PASS >876 N/m (>5 pli) |
| Elevated Temperature (AAMA 711) Peal Adhesion | ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants | PASS >876 N/m (>5 pli) |
| Thermal Cycling (AAMA 711) Peal Adhesion | ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants | PASS >876 N/m (>5 pli) |
| Water Immersion (AAMA 711) Peal Adhesion | ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants | PASS >876 N/m (>5 pli) |
| 90° Peel Adhesion 24 hours | ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers | >0.11 MPa (>16 psi) |
VaproLiqui-Shield Testing
