(
|
PHYSICAL PROPERTIES |
|
|
PROPERTY |
RESULT |
|
Color |
Red/White |
|
Thickness |
1.02 mm (40 mil) |
|
Roll Dimensions |
36” x 75’ (0.91 m x 22.9 m) |
|
VOCs |
None |
|
Exposure Before Permanent Roofing Materials |
60 days |
|
Application Temperature |
32°F (0°C) - 260°F (127°C) |
|
Warranty |
2 year material warranty |
|
TESTING DATA |
||
|
PROPERTY |
STANDARD |
RESULT |
|
Strength |
||
|
Maximum Tensile Strength @ 73.4°F (23°C) |
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
MD - 3.96 MPa (574 psi) XMD - 4.03 Mpa (585 psi) |
|
Elongation at Max Tensile Strength @ 73.4°F (23°C) |
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
>800% |
|
Dry Tensile Strength |
ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
MD - 5.66 MPa (821 psi) XMD - 7.27 Mpa (1055 psi) |
|
Breaking Strength |
ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
MD – 5.06 N/mm (28.9 lbf/in.) XMD – 6.51 N/mm (37.2 lbf/in.) |
|
Low Temperature Flexibility |
ASTM D1970 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection |
PASS |
|
Tear Resistance (Tongue Tear) |
ASTM D4073 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes |
69.30 N (15.58 lbf) |
|
Puncture Resistance |
ASTM E154 Standard Practice for Testing Load-Strain Properties of Roofing Membranes |
Puncture Strength 237 N (53.3 lbf) |
|
Water Vapor Transmittance |
||
|
Water Vapor Transmission Desiccant Method Procedure A, 23°C (73.4°F) 50%RH |
ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials |
0.0033 Perm (grain/h•ft²•inchHg) 0.19 ng/Pa•s•m² |
|
Water Vapor Transmission Water Method Procedure B, 23°C (73.4°F) 50%RH |
ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials |
0.0034 Perm (grain/h•ft²•inchHg) 0.197 ng/Pa•s•m² |
|
Adhesion Testing |
||
|
Peel Adhesion |
ASTM D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
Concrete 1665 N/m (9.51pli) DensGlass® 1469 N/m (8.39 pli) |
|
Lap Adhesion |
ASTM D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
1839 N/m (10.5 pli) |
|
Pull Adhesion |
ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
Concrete 0.25 MPa (35.7 psi) DensGlass® 0.22 MPa (31.7 psi) |
|
Air Resistance Testing |
||
|
Air Permeance |
ASTM E2178 Standard Test Method for Air Permeance of Building Materials |
0.0003 l/(s x m²) @ 75 Pa (0.000 cfm/ft² @ 1.57 psf) |
|
Air Barrier |
ASTM E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies |
0.061 l/(s x m²) @ 75 Pa (0.012 cfm/ft² @ 1.57 psf) |
|
Water Resistance Testing |
||
|
Nail Sealability |
ASTM D1970/ section 7.9 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection ASTM D7349 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners |
PASS |
|
Water Resistance (Control after Weathering) |
AATCC 127 Hydrostatic pressure test (550 mm water column for 5 hours), American Association of Textile Chemists and Colorists |
PASS |
